sdk:examples: add flash_ctrl

Signed-off-by: liangkangnan <liangkangnan@163.com>
2021-11-04 10:13:11 +08:00 · 2021-11-04 10:13:11 +08:00 · 8f4c2cb7fe
parent e097662c62
commit 8f4c2cb7fe
7 changed files with 293 additions and 0 deletions
--- a/sdk/bsp/bsp.mk
+++ b/sdk/bsp/bsp.mk
@ -29,6 +29,7 @@ C_SRCS += $(BSP_DIR)/lib/i2c.c
 C_SRCS += $(BSP_DIR)/lib/spi.c
 C_SRCS += $(BSP_DIR)/lib/pinmux.c
 C_SRCS += $(BSP_DIR)/lib/flash_n25q.c
+C_SRCS += $(BSP_DIR)/lib/flash_ctrl.c

 LINKER_SCRIPT := $(BSP_DIR)/link.lds

--- a/sdk/bsp/include/flash_ctrl.h
+++ b/sdk/bsp/include/flash_ctrl.h
@ -0,0 +1,72 @@
+// Generated register defines for flash_ctrl
+
+// Copyright information found in source file:
+// Copyright lowRISC contributors.
+
+// Licensing information found in source file:
+// Licensed under the Apache License, Version 2.0, see LICENSE for details.
+// SPDX-License-Identifier: Apache-2.0
+
+#ifndef _FLASH_CTRL_REG_DEFS_
+#define _FLASH_CTRL_REG_DEFS_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+// Register width
+#define FLASH_CTRL_PARAM_REG_WIDTH 32
+
+#define FLASH_CTRL_BASE_ADDR      (0x0E000000)
+#define FLASH_CTRL_REG(offset)    (*((volatile uint32_t *)(FLASH_CTRL_BASE_ADDR + offset)))
+
+typedef enum {
+    FLASH_OP_READ = 0,
+    FLASH_OP_PROGRAM,
+    FLASH_OP_ERASE,
+    FLASH_OP_INIT
+} flash_op_mode_e;
+
+void flash_ctrl_init();
+void flash_ctrl_deinit();
+void flash_ctrl_qspi_init();
+void flash_ctrl_read(uint32_t start_addr, uint32_t *data, uint32_t len);
+uint8_t flash_ctrl_page_program(uint32_t page_addr, uint32_t *data, uint32_t len);
+uint8_t flash_ctrl_sector_erase(uint32_t sector_addr);
+
+// flash_ctrl control register
+#define FLASH_CTRL_CTRL_REG_OFFSET 0x0
+#define FLASH_CTRL_CTRL_REG_RESVAL 0x0
+#define FLASH_CTRL_CTRL_START_BIT 0
+#define FLASH_CTRL_CTRL_OP_MODE_MASK 0x3
+#define FLASH_CTRL_CTRL_OP_MODE_OFFSET 1
+#define FLASH_CTRL_CTRL_OP_MODE_FIELD \
+  ((bitfield_field32_t) { .mask = FLASH_CTRL_CTRL_OP_MODE_MASK, .index = FLASH_CTRL_CTRL_OP_MODE_OFFSET })
+#define FLASH_CTRL_CTRL_SW_CTRL_BIT 3
+#define FLASH_CTRL_CTRL_PROGRAM_INIT_BIT 4
+#define FLASH_CTRL_CTRL_WRITE_ERROR_BIT 5
+#define FLASH_CTRL_CTRL_RESERVED_MASK 0x3ffffff
+#define FLASH_CTRL_CTRL_RESERVED_OFFSET 6
+#define FLASH_CTRL_CTRL_RESERVED_FIELD \
+  ((bitfield_field32_t) { .mask = FLASH_CTRL_CTRL_RESERVED_MASK, .index = FLASH_CTRL_CTRL_RESERVED_OFFSET })
+
+// flash_ctrl address register
+#define FLASH_CTRL_ADDR_REG_OFFSET 0x4
+#define FLASH_CTRL_ADDR_REG_RESVAL 0x0
+#define FLASH_CTRL_ADDR_RW_ADDRESS_MASK 0x7fffff
+#define FLASH_CTRL_ADDR_RW_ADDRESS_OFFSET 0
+#define FLASH_CTRL_ADDR_RW_ADDRESS_FIELD \
+  ((bitfield_field32_t) { .mask = FLASH_CTRL_ADDR_RW_ADDRESS_MASK, .index = FLASH_CTRL_ADDR_RW_ADDRESS_OFFSET })
+#define FLASH_CTRL_ADDR_RESERVED_MASK 0x1ff
+#define FLASH_CTRL_ADDR_RESERVED_OFFSET 23
+#define FLASH_CTRL_ADDR_RESERVED_FIELD \
+  ((bitfield_field32_t) { .mask = FLASH_CTRL_ADDR_RESERVED_MASK, .index = FLASH_CTRL_ADDR_RESERVED_OFFSET })
+
+// flash_ctrl data register
+#define FLASH_CTRL_DATA_REG_OFFSET 0x8
+#define FLASH_CTRL_DATA_REG_RESVAL 0x0
+
+#ifdef __cplusplus
+}  // extern "C"
+#endif
+#endif  // _FLASH_CTRL_REG_DEFS_
+// End generated register defines for flash_ctrl
--- a/sdk/bsp/lib/flash_ctrl.c
+++ b/sdk/bsp/lib/flash_ctrl.c
@ -0,0 +1,122 @@
+#include <stdint.h>
+
+#include "../../bsp/include/flash_ctrl.h"
+#include "../../bsp/include/utils.h"
+
+
+void flash_ctrl_init()
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= 1 << FLASH_CTRL_CTRL_SW_CTRL_BIT;
+}
+
+void flash_ctrl_deinit()
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(1 << FLASH_CTRL_CTRL_SW_CTRL_BIT);
+}
+
+// 初始化flash为QSPI模式
+void flash_ctrl_qspi_init()
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(FLASH_CTRL_CTRL_OP_MODE_MASK << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= (FLASH_OP_INIT << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |=  1 << FLASH_CTRL_CTRL_START_BIT;
+    while (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_START_BIT));
+}
+
+static void flash_ctrl_program_init()
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= 1 << FLASH_CTRL_CTRL_PROGRAM_INIT_BIT;
+}
+
+static void flash_ctrl_program_deinit()
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(1 << FLASH_CTRL_CTRL_PROGRAM_INIT_BIT);
+}
+
+// 读数据
+void flash_ctrl_read(uint32_t start_addr, uint32_t *data, uint32_t len)
+{
+    uint32_t addr, i;
+
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(FLASH_CTRL_CTRL_OP_MODE_MASK << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= (FLASH_OP_READ << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+
+    addr = start_addr;
+    len = len >> 2;
+
+    for (i = 0; i < len; i++) {
+        FLASH_CTRL_REG(FLASH_CTRL_ADDR_REG_OFFSET) = addr & FLASH_CTRL_ADDR_RW_ADDRESS_MASK;
+        FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |=  1 << FLASH_CTRL_CTRL_START_BIT;
+        while (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_START_BIT));
+        data[i] = FLASH_CTRL_REG(FLASH_CTRL_DATA_REG_OFFSET);
+        addr += 4;
+    }
+}
+
+// 以word为单位进行烧写，一次最多烧一个page(256个字节)
+// 返回值，1：成功，0：失败
+uint8_t flash_ctrl_page_program(uint32_t page_addr, uint32_t *data, uint32_t len)
+{
+    uint32_t i, index;
+    uint32_t prog_len, remain_len;
+
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(FLASH_CTRL_CTRL_OP_MODE_MASK << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= (FLASH_OP_PROGRAM << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+
+    FLASH_CTRL_REG(FLASH_CTRL_ADDR_REG_OFFSET) = page_addr & FLASH_CTRL_ADDR_RW_ADDRESS_MASK;
+
+    if (len > 4)
+        flash_ctrl_program_init();
+
+    remain_len = len;
+    index = 0;
+
+    while (remain_len > 0) {
+        // 一次最多烧32个byte
+        if (remain_len > 32)
+            prog_len = 32;
+        else
+            prog_len = remain_len;
+
+        remain_len -= prog_len;
+        // word的个数
+        prog_len = prog_len >> 2;
+
+        // 每次烧写一个word
+        for (i = 0; i < prog_len; i++) {
+            FLASH_CTRL_REG(FLASH_CTRL_DATA_REG_OFFSET) = data[index];
+            FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |=  1 << FLASH_CTRL_CTRL_START_BIT;
+            while (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_START_BIT));
+            index++;
+        }
+    }
+
+    if (len > 4) {
+        flash_ctrl_program_deinit();
+        while (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_START_BIT));
+    }
+
+    if (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_WRITE_ERROR_BIT))
+        return 0;
+    else
+        return 1;
+}
+
+// 扇区擦除
+// 返回值，1：成功，0：失败
+uint8_t flash_ctrl_sector_erase(uint32_t sector_addr)
+{
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) &= ~(FLASH_CTRL_CTRL_OP_MODE_MASK << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |= (FLASH_OP_ERASE << FLASH_CTRL_CTRL_OP_MODE_OFFSET);
+
+    FLASH_CTRL_REG(FLASH_CTRL_ADDR_REG_OFFSET) = sector_addr & FLASH_CTRL_ADDR_RW_ADDRESS_MASK;
+
+    FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) |=  1 << FLASH_CTRL_CTRL_START_BIT;
+    while (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_START_BIT));
+
+    if (FLASH_CTRL_REG(FLASH_CTRL_CTRL_REG_OFFSET) & (1 << FLASH_CTRL_CTRL_WRITE_ERROR_BIT))
+        return 0;
+    else
+        return 1;
+}
--- a/sdk/examples/flash_ctrl/.gitignore
+++ b/sdk/examples/flash_ctrl/.gitignore
@ -0,0 +1,8 @@
+# Object files
+*.o
+*.ko
+*.obj
+*.bin
+*.dump
+*.mem
+flash_ctrl
--- a/sdk/examples/flash_ctrl/Makefile
+++ b/sdk/examples/flash_ctrl/Makefile
@ -0,0 +1,20 @@
+RISCV_ARCH := rv32im
+RISCV_ABI := ilp32
+RISCV_MCMODEL := medlow
+
+
+TARGET = flash_ctrl
+
+
+#CFLAGS += -DSIMULATION
+#CFLAGS += -O2
+#ASM_SRCS +=
+#LDFLAGS +=
+#INCLUDES += -I.
+
+C_SRCS := \
+	main.c \
+
+
+BSP_DIR = ../../bsp
+include ../../bsp/bsp.mk
--- a/sdk/examples/flash_ctrl/README.md
+++ b/sdk/examples/flash_ctrl/README.md
@ -0,0 +1 @@
+flash读、擦除、编程例程。
--- a/sdk/examples/flash_ctrl/main.c
+++ b/sdk/examples/flash_ctrl/main.c
@ -0,0 +1,69 @@
+#include <stdint.h>
+
+#include "../../bsp/include/uart.h"
+#include "../../bsp/include/xprintf.h"
+#include "../../bsp/include/pinmux.h"
+#include "../../bsp/include/flash_ctrl.h"
+
+
+#define DATA_BUF_LEN    (32)
+
+// bytes = DATA_BUF_LEN * 4
+#define DATA_BYTES      (DATA_BUF_LEN << 2)
+
+static uint32_t write_data_buf[DATA_BUF_LEN];
+static uint32_t read_data_buf[DATA_BUF_LEN];
+
+
+int main()
+{
+    uint32_t i;
+
+    // UART引脚配置
+    pinmux_set_io0_func(IO0_UART0_TX);
+    pinmux_set_io3_func(IO3_UART0_RX);
+    // UART初始化
+    uart_init(UART0, uart0_putc);
+
+    flash_ctrl_init();
+
+    // 擦除0子扇区
+    if (!flash_ctrl_sector_erase(0))
+        xprintf("erase failed...\n");
+
+    // 构造编程数据
+    for (i = 0; i < DATA_BUF_LEN; i++)
+        write_data_buf[i] = i;
+
+    // 编程第0页
+    if (!flash_ctrl_page_program(0, write_data_buf, DATA_BYTES))
+        xprintf("program failed...\n");
+
+    // 读0x0地址开始的数据
+    flash_ctrl_read(0, read_data_buf, DATA_BYTES);
+
+    flash_ctrl_deinit();
+
+    // 打印读到的数据
+    for (i = 0; i < DATA_BUF_LEN; i++)
+        xprintf("0x%x\n", read_data_buf[i]);
+
+/************************** QSPI测试 **************************/
+
+    flash_ctrl_init();
+
+    // QSPI初始化
+    flash_ctrl_qspi_init();
+
+    // 读0x0地址开始的数据
+    flash_ctrl_read(0, read_data_buf, DATA_BYTES);
+
+    flash_ctrl_deinit();
+
+    xprintf("\nquad spi test, read data:\n");
+    // 打印读到的数据
+    for (i = 0; i < DATA_BUF_LEN; i++)
+        xprintf("0x%x\n", read_data_buf[i]);
+
+    while (1);
+}