/* Copyright 2019 Blue Liang, liangkangnan@163.com Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ `include "defines.v" // 译码模块 // 纯组合逻辑电路 module idu( input wire clk, input wire rst_n, // from if_id input wire[31:0] inst_i, // 指令内容 input wire[31:0] inst_addr_i, // 指令地址 // from gpr_reg input wire[31:0] rs1_rdata_i, // 通用寄存器1输入数据 input wire[31:0] rs2_rdata_i, // 通用寄存器2输入数据 output wire stall_o, // to id_ex output wire[31:0] inst_o, output wire[`DECINFO_WIDTH-1:0] dec_info_bus_o, output wire[31:0] dec_imm_o, output wire[31:0] dec_pc_o, output wire[4:0] rs1_raddr_o, output wire[4:0] rs2_raddr_o, output wire[31:0] rs1_rdata_o, output wire[31:0] rs2_rdata_o, output wire[4:0] rd_waddr_o, output wire rd_we_o ); assign inst_o = inst_i; assign rs1_rdata_o = rs1_rdata_i; assign rs2_rdata_o = rs2_rdata_i; // 取出指令中的每一个域 wire[6:0] opcode = inst_i[6:0]; wire[2:0] funct3 = inst_i[14:12]; wire[6:0] funct7 = inst_i[31:25]; wire[4:0] rd = inst_i[11:7]; wire[4:0] rs1 = inst_i[19:15]; wire[4:0] rs2 = inst_i[24:20]; wire[11:0] type_i_imm_11_0 = inst_i[31:20]; wire[6:0] type_s_imm_11_5 = inst_i[31:25]; wire[4:0] type_s_imm_4_0 = inst_i[11:7]; wire[6:0] type_b_imm_12_10_5 = inst_i[31:25]; wire[4:0] type_b_imm_4_1_11 = inst_i[11:7]; wire[19:0] type_u_imm_31_12 = inst_i[31:12]; wire[19:0] type_j_imm_31_12 = inst_i[31:12]; // 指令opcode域的取值 wire opcode_0110111 = (opcode == 7'b0110111); wire opcode_0010111 = (opcode == 7'b0010111); wire opcode_1101111 = (opcode == 7'b1101111); wire opcode_1100111 = (opcode == 7'b1100111); wire opcode_1100011 = (opcode == 7'b1100011); wire opcode_0000011 = (opcode == 7'b0000011); wire opcode_0100011 = (opcode == 7'b0100011); wire opcode_0010011 = (opcode == 7'b0010011); wire opcode_0110011 = (opcode == 7'b0110011); wire opcode_0001111 = (opcode == 7'b0001111); wire opcode_1110011 = (opcode == 7'b1110011); // 指令funct3域的取值 wire funct3_000 = (funct3 == 3'b000); wire funct3_001 = (funct3 == 3'b001); wire funct3_010 = (funct3 == 3'b010); wire funct3_011 = (funct3 == 3'b011); wire funct3_100 = (funct3 == 3'b100); wire funct3_101 = (funct3 == 3'b101); wire funct3_110 = (funct3 == 3'b110); wire funct3_111 = (funct3 == 3'b111); // 指令funct7域的取值 wire funct7_0000000 = (funct7 == 7'b0000000); wire funct7_0100000 = (funct7 == 7'b0100000); wire funct7_0000001 = (funct7 == 7'b0000001); // I类型指令imm域的取值 wire type_i_imm_000000000000 = (type_i_imm_11_0 == 12'b000000000000); wire type_i_imm_000000000001 = (type_i_imm_11_0 == 12'b000000000001); // 译码出具体指令 wire inst_lui = opcode_0110111; wire inst_auipc = opcode_0010111; wire inst_jal = opcode_1101111; wire inst_jalr = opcode_1100111 & funct3_000; wire inst_beq = opcode_1100011 & funct3_000; wire inst_bne = opcode_1100011 & funct3_001; wire inst_blt = opcode_1100011 & funct3_100; wire inst_bge = opcode_1100011 & funct3_101; wire inst_bltu = opcode_1100011 & funct3_110; wire inst_bgeu = opcode_1100011 & funct3_111; wire inst_lb = opcode_0000011 & funct3_000; wire inst_lh = opcode_0000011 & funct3_001; wire inst_lw = opcode_0000011 & funct3_010; wire inst_lbu = opcode_0000011 & funct3_100; wire inst_lhu = opcode_0000011 & funct3_101; wire inst_sb = opcode_0100011 & funct3_000; wire inst_sh = opcode_0100011 & funct3_001; wire inst_sw = opcode_0100011 & funct3_010; wire inst_addi = opcode_0010011 & funct3_000; wire inst_slti = opcode_0010011 & funct3_010; wire inst_sltiu = opcode_0010011 & funct3_011; wire inst_xori = opcode_0010011 & funct3_100; wire inst_ori = opcode_0010011 & funct3_110; wire inst_andi = opcode_0010011 & funct3_111; wire inst_slli = opcode_0010011 & funct3_001 & funct7_0000000; wire inst_srli = opcode_0010011 & funct3_101 & funct7_0000000; wire inst_srai = opcode_0010011 & funct3_101 & funct7_0100000; wire inst_add = opcode_0110011 & funct3_000 & funct7_0000000; wire inst_sub = opcode_0110011 & funct3_000 & funct7_0100000; wire inst_sll = opcode_0110011 & funct3_001 & funct7_0000000; wire inst_slt = opcode_0110011 & funct3_010 & funct7_0000000; wire inst_sltu = opcode_0110011 & funct3_011 & funct7_0000000; wire inst_xor = opcode_0110011 & funct3_100 & funct7_0000000; wire inst_srl = opcode_0110011 & funct3_101 & funct7_0000000; wire inst_sra = opcode_0110011 & funct3_101 & funct7_0100000; wire inst_or = opcode_0110011 & funct3_110 & funct7_0000000; wire inst_and = opcode_0110011 & funct3_111 & funct7_0000000; wire inst_fence = opcode_0001111 & funct3_000; wire inst_ecall = (inst_i == `INST_ECALL); wire inst_ebreak = (inst_i == `INST_EBREAK); wire inst_fence_i = opcode_0001111 & funct3_001; wire inst_csrrw = opcode_1110011 & funct3_001; wire inst_csrrs = opcode_1110011 & funct3_010; wire inst_csrrc = opcode_1110011 & funct3_011; wire inst_csrrwi = opcode_1110011 & funct3_101; wire inst_csrrsi = opcode_1110011 & funct3_110; wire inst_csrrci = opcode_1110011 & funct3_111; wire inst_mul = opcode_0110011 & funct3_000 & funct7_0000001; wire inst_mulh = opcode_0110011 & funct3_001 & funct7_0000001; wire inst_mulhsu = opcode_0110011 & funct3_010 & funct7_0000001; wire inst_mulhu = opcode_0110011 & funct3_011 & funct7_0000001; wire inst_div = opcode_0110011 & funct3_100 & funct7_0000001; wire inst_divu = opcode_0110011 & funct3_101 & funct7_0000001; wire inst_rem = opcode_0110011 & funct3_110 & funct7_0000001; wire inst_remu = opcode_0110011 & funct3_111 & funct7_0000001; wire inst_nop = (inst_i == `INST_NOP); wire inst_mret = (inst_i == `INST_MRET); // 将指令分类 wire inst_type_load = opcode_0000011; wire inst_type_store = opcode_0100011; wire inst_type_branch = opcode_1100011; wire inst_type_muldiv = inst_mul | inst_mulh | inst_mulhsu | inst_mulhu | inst_div | inst_divu | inst_rem | inst_remu; wire inst_type_div = inst_div | inst_divu | inst_rem | inst_remu; wire[`DECINFO_ALU_BUS_WIDTH-1:0] dec_alu_info_bus; assign dec_alu_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_ALU; assign dec_alu_info_bus[`DECINFO_ALU_LUI] = inst_lui; assign dec_alu_info_bus[`DECINFO_ALU_AUIPC] = inst_auipc; assign dec_alu_info_bus[`DECINFO_ALU_ADD] = inst_add | inst_addi; assign dec_alu_info_bus[`DECINFO_ALU_SUB] = inst_sub; assign dec_alu_info_bus[`DECINFO_ALU_SLL] = inst_sll | inst_slli; assign dec_alu_info_bus[`DECINFO_ALU_SLT] = inst_slt | inst_slti; assign dec_alu_info_bus[`DECINFO_ALU_SLTU] = inst_sltu | inst_sltiu; assign dec_alu_info_bus[`DECINFO_ALU_XOR] = inst_xor | inst_xori; assign dec_alu_info_bus[`DECINFO_ALU_SRL] = inst_srl | inst_srli; assign dec_alu_info_bus[`DECINFO_ALU_SRA] = inst_sra | inst_srai; assign dec_alu_info_bus[`DECINFO_ALU_OR] = inst_or | inst_ori; assign dec_alu_info_bus[`DECINFO_ALU_AND] = inst_and | inst_andi; assign dec_alu_info_bus[`DECINFO_ALU_OP2IMM] = opcode_0010011 | inst_lui | inst_auipc; assign dec_alu_info_bus[`DECINFO_ALU_OP1PC] = inst_auipc; wire[`DECINFO_BJP_BUS_WIDTH-1:0] dec_bjp_info_bus; assign dec_bjp_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_BJP; assign dec_bjp_info_bus[`DECINFO_BJP_JUMP] = inst_jal | inst_jalr; assign dec_bjp_info_bus[`DECINFO_BJP_BEQ] = inst_beq; assign dec_bjp_info_bus[`DECINFO_BJP_BNE] = inst_bne; assign dec_bjp_info_bus[`DECINFO_BJP_BLT] = inst_blt; assign dec_bjp_info_bus[`DECINFO_BJP_BGE] = inst_bge; assign dec_bjp_info_bus[`DECINFO_BJP_BLTU] = inst_bltu; assign dec_bjp_info_bus[`DECINFO_BJP_BGEU] = inst_bgeu; assign dec_bjp_info_bus[`DECINFO_BJP_OP1RS1] = inst_jalr; wire[`DECINFO_MULDIV_BUS_WIDTH-1:0] dec_muldiv_info_bus; assign dec_muldiv_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_MULDIV; assign dec_muldiv_info_bus[`DECINFO_MULDIV_MUL] = inst_mul; assign dec_muldiv_info_bus[`DECINFO_MULDIV_MULH] = inst_mulh; assign dec_muldiv_info_bus[`DECINFO_MULDIV_MULHSU] = inst_mulhsu; assign dec_muldiv_info_bus[`DECINFO_MULDIV_MULHU] = inst_mulhu; assign dec_muldiv_info_bus[`DECINFO_MULDIV_DIV] = inst_div; assign dec_muldiv_info_bus[`DECINFO_MULDIV_DIVU] = inst_divu; assign dec_muldiv_info_bus[`DECINFO_MULDIV_REM] = inst_rem; assign dec_muldiv_info_bus[`DECINFO_MULDIV_REMU] = inst_remu; wire[`DECINFO_CSR_BUS_WIDTH-1:0] dec_csr_info_bus; assign dec_csr_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_CSR; assign dec_csr_info_bus[`DECINFO_CSR_CSRRW] = inst_csrrw | inst_csrrwi; assign dec_csr_info_bus[`DECINFO_CSR_CSRRS] = inst_csrrs | inst_csrrsi; assign dec_csr_info_bus[`DECINFO_CSR_CSRRC] = inst_csrrc | inst_csrrci; assign dec_csr_info_bus[`DECINFO_CSR_RS1IMM] = inst_csrrwi | inst_csrrsi | inst_csrrci; assign dec_csr_info_bus[`DECINFO_CSR_CSRADDR] = inst_i[31:20]; wire[`DECINFO_MEM_BUS_WIDTH-1:0] dec_mem_info_bus; assign dec_mem_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_MEM; assign dec_mem_info_bus[`DECINFO_MEM_LB] = inst_lb; assign dec_mem_info_bus[`DECINFO_MEM_LH] = inst_lh; assign dec_mem_info_bus[`DECINFO_MEM_LW] = inst_lw; assign dec_mem_info_bus[`DECINFO_MEM_LBU] = inst_lbu; assign dec_mem_info_bus[`DECINFO_MEM_LHU] = inst_lhu; assign dec_mem_info_bus[`DECINFO_MEM_SB] = inst_sb; assign dec_mem_info_bus[`DECINFO_MEM_SH] = inst_sh; assign dec_mem_info_bus[`DECINFO_MEM_SW] = inst_sw; wire[`DECINFO_SYS_BUS_WIDTH-1:0] dec_sys_info_bus; assign dec_sys_info_bus[`DECINFO_GRP_BUS] = `DECINFO_GRP_SYS; assign dec_sys_info_bus[`DECINFO_SYS_ECALL] = inst_ecall; assign dec_sys_info_bus[`DECINFO_SYS_EBREAK] = inst_ebreak; assign dec_sys_info_bus[`DECINFO_SYS_NOP] = inst_nop; assign dec_sys_info_bus[`DECINFO_SYS_MRET] = inst_mret; assign dec_sys_info_bus[`DECINFO_SYS_FENCE] = inst_fence | inst_fence_i; // 指令中的立即数 wire[31:0] inst_u_type_imm = {inst_i[31:12], 12'b0}; wire[31:0] inst_j_type_imm = {{12{inst_i[31]}}, inst_i[19:12], inst_i[20], inst_i[30:21], 1'b0}; wire[31:0] inst_b_type_imm = {{20{inst_i[31]}}, inst_i[7], inst_i[30:25], inst_i[11:8], 1'b0}; wire[31:0] inst_s_type_imm = {{20{inst_i[31]}}, inst_i[31:25], inst_i[11:7]}; wire[31:0] inst_i_type_imm = {{20{inst_i[31]}}, inst_i[31:20]}; wire[31:0] inst_csr_type_imm = {27'h0, inst_i[19:15]}; wire[31:0] inst_shift_type_imm = {27'h0, inst_i[24:20]}; wire inst_sel_u_imm = inst_lui | inst_auipc; wire inst_sel_j_imm = inst_jal; wire inst_sel_b_imm = inst_type_branch; wire inst_sel_s_imm = inst_type_store; wire inst_sel_i_imm = inst_addi | inst_slti | inst_sltiu | inst_xori | inst_ori | inst_andi | inst_type_load | inst_jalr; wire inst_sel_csr_imm = inst_csrrwi | inst_csrrsi | inst_csrrci; wire inst_sel_shift_imm = inst_slli | inst_srli | inst_srai; assign dec_imm_o = ({32{inst_sel_u_imm}} & inst_u_type_imm) | ({32{inst_sel_j_imm}} & inst_j_type_imm) | ({32{inst_sel_b_imm}} & inst_b_type_imm) | ({32{inst_sel_s_imm}} & inst_s_type_imm) | ({32{inst_sel_i_imm}} & inst_i_type_imm) | ({32{inst_sel_csr_imm}} & inst_csr_type_imm) | ({32{inst_sel_shift_imm}} & inst_shift_type_imm); wire op_alu = inst_lui | inst_auipc | opcode_0010011 | (opcode_0110011 & (~inst_type_muldiv)); wire op_bjp = inst_jal | inst_jalr | inst_type_branch; wire op_muldiv = inst_type_muldiv; wire op_csr = inst_csrrw | inst_csrrwi | inst_csrrs | inst_csrrsi | inst_csrrc | inst_csrrci; wire op_sys = inst_ebreak | inst_ecall | inst_nop | inst_mret | inst_fence | inst_fence_i; wire op_mem = inst_type_load | inst_type_store; assign dec_info_bus_o = ({`DECINFO_WIDTH{op_alu}} & {{`DECINFO_WIDTH-`DECINFO_ALU_BUS_WIDTH{1'b0}}, dec_alu_info_bus}) | ({`DECINFO_WIDTH{op_bjp}} & {{`DECINFO_WIDTH-`DECINFO_BJP_BUS_WIDTH{1'b0}}, dec_bjp_info_bus}) | ({`DECINFO_WIDTH{op_muldiv}} & {{`DECINFO_WIDTH-`DECINFO_MULDIV_BUS_WIDTH{1'b0}}, dec_muldiv_info_bus}) | ({`DECINFO_WIDTH{op_csr}} & {{`DECINFO_WIDTH-`DECINFO_CSR_BUS_WIDTH{1'b0}}, dec_csr_info_bus}) | ({`DECINFO_WIDTH{op_mem}} & {{`DECINFO_WIDTH-`DECINFO_MEM_BUS_WIDTH{1'b0}}, dec_mem_info_bus}) | ({`DECINFO_WIDTH{op_sys}} & {{`DECINFO_WIDTH-`DECINFO_SYS_BUS_WIDTH{1'b0}}, dec_sys_info_bus}); assign dec_pc_o = inst_addr_i; // 是否需要访问rs1寄存器 wire access_rs1 = (~inst_lui) & (~inst_auipc) & (~inst_jal) & (~inst_ecall) & (~inst_ebreak) & (~inst_csrrwi) & (~inst_csrrsi) & (~inst_csrrci) & (~inst_nop) & (~inst_fence) & (~inst_fence_i) & (~inst_mret); assign rs1_raddr_o = access_rs1? rs1: 5'h0; // 是否需要访问rs2寄存器 wire access_rs2 = opcode_0110011 | inst_type_store | inst_type_branch; assign rs2_raddr_o = access_rs2? rs2: 5'h0; // 是否需要访问rd寄存器 wire access_rd = inst_lui | inst_auipc | inst_jal | inst_jalr | inst_type_load | opcode_0010011 | opcode_0110011 | op_csr; assign rd_waddr_o = access_rd? rd: 5'h0; assign rd_we_o = access_rd; assign stall_o = 1'b0; endmodule