174 lines
3.7 KiB
Verilog
174 lines
3.7 KiB
Verilog
/*
|
|
Copyright 2020 Blue Liang, liangkangnan@163.com
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
// 带默认值和控制信号的流水线触发器
|
|
module gen_pipe_dff #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
input wire rst_n,
|
|
input wire hold_en,
|
|
|
|
input wire[DW-1:0] def_val,
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk or negedge rst_n) begin
|
|
if (!rst_n | hold_en) begin
|
|
qout_r <= def_val;
|
|
end else begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|
|
|
|
// 复位后输出为0的触发器
|
|
module gen_rst_0_dff #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
input wire rst_n,
|
|
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk or negedge rst_n) begin
|
|
if (!rst_n) begin
|
|
qout_r <= {DW{1'b0}};
|
|
end else begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|
|
|
|
// 复位后输出为1的触发器
|
|
module gen_rst_1_dff #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
input wire rst_n,
|
|
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk or negedge rst_n) begin
|
|
if (!rst_n) begin
|
|
qout_r <= {DW{1'b1}};
|
|
end else begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|
|
|
|
// 复位后输出为默认值的触发器
|
|
module gen_rst_def_dff #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
input wire rst_n,
|
|
input wire[DW-1:0] def_val,
|
|
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk or negedge rst_n) begin
|
|
if (!rst_n) begin
|
|
qout_r <= def_val;
|
|
end else begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|
|
|
|
// 带使能端、复位后输出为0的触发器
|
|
module gen_en_dff #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
input wire rst_n,
|
|
|
|
input wire en,
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk or negedge rst_n) begin
|
|
if (!rst_n) begin
|
|
qout_r <= {DW{1'b0}};
|
|
end else if (en == 1'b1) begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|
|
|
|
// 带使能端、没有复位的触发器
|
|
module gen_en_dffnr #(
|
|
parameter DW = 32)(
|
|
|
|
input wire clk,
|
|
|
|
input wire en,
|
|
input wire[DW-1:0] din,
|
|
output wire[DW-1:0] qout
|
|
|
|
);
|
|
|
|
reg[DW-1:0] qout_r;
|
|
|
|
always @ (posedge clk) begin
|
|
if (en == 1'b1) begin
|
|
qout_r <= din;
|
|
end
|
|
end
|
|
|
|
assign qout = qout_r;
|
|
|
|
endmodule
|