tinyriscv/rtl/regs.v

74 lines
2.5 KiB
Verilog

/*
Copyright 2019 Blue Liang, liangkangnan@163.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
`include "defines.v"
// common reg module
module regs (
input wire clk,
input wire rst,
input wire we, // reg write enable
input wire[`RegAddrBus] waddr, // reg write addr
input wire[`RegBus] wdata, // reg write data
input wire re1, // reg1 read enable
input wire[`RegAddrBus] raddr1, // reg1 read addr
output reg[`RegBus] rdata1, // reg1 read data
input wire re2, // reg2 read enable
input wire[`RegAddrBus] raddr2, // reg2 read addr
output reg[`RegBus] rdata2 // reg2 read data
);
reg[`RegBus] regs[0:`RegNum - 1];
always @ (posedge clk) begin
if (rst == `RstDisable) begin
if((we == `WriteEnable) && (waddr != `RegNumLog2'h0)) begin
regs[waddr] <= wdata;
end
end
end
always @ (*) begin
if(rst == `RstEnable) begin
rdata1 <= `ZeroWord;
end else if(raddr1 == `RegNumLog2'h0) begin
rdata1 <= `ZeroWord;
end else if(re1 == `ReadEnable) begin
rdata1 <= regs[raddr1];
end else begin
rdata1 <= `ZeroWord;
end
end
always @ (*) begin
if(rst == `RstEnable) begin
rdata2 <= `ZeroWord;
end else if(raddr2 == `RegNumLog2'h0) begin
rdata2 <= `ZeroWord;
end else if(re2 == `ReadEnable) begin
rdata2 <= regs[raddr2];
end else begin
rdata2 <= `ZeroWord;
end
end
endmodule