tinyriscv/rtl/perips/i2c/i2c_top.sv

84 lines
2.6 KiB
Systemverilog

/*
Copyright 2021 Blue Liang, liangkangnan@163.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
module i2c_top (
input logic clk_i,
input logic rst_ni,
output logic scl_o,
output logic scl_oe_o,
input logic scl_i,
output logic sda_o,
output logic sda_oe_o,
input logic sda_i,
output logic irq_o,
// OBI总线接口信号
input logic req_i,
input logic we_i,
input logic [ 3:0] be_i,
input logic [31:0] addr_i,
input logic [31:0] data_i,
output logic gnt_o,
output logic rvalid_o,
output logic [31:0] data_o
);
logic re;
logic we;
logic [31:0] addr;
logic [31:0] reg_rdata;
assign gnt_o = req_i;
// 读信号
assign re = req_i & (!we_i);
// 写信号
assign we = req_i & we_i;
// 去掉基地址
assign addr = {16'h0, addr_i[15:0]};
always_ff @(posedge clk_i or negedge rst_ni) begin
if (!rst_ni) begin
rvalid_o <= '0;
data_o <= '0;
end else begin
rvalid_o <= req_i;
data_o <= reg_rdata;
end
end
i2c_core u_i2c_core (
.clk_i (clk_i),
.rst_ni (rst_ni),
.scl_o (scl_o),
.scl_oe_o (scl_oe_o),
.scl_i (scl_i),
.sda_o (sda_o),
.sda_oe_o (sda_oe_o),
.sda_i (sda_i),
.irq_o (irq_o),
.reg_we_i (we),
.reg_re_i (re),
.reg_wdata_i(data_i),
.reg_be_i (be_i),
.reg_addr_i (addr),
.reg_rdata_o(reg_rdata)
);
endmodule