zcy
/
triangle
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

10.12

master
zrg 2021-10-12 23:44:24 +08:00
parent d42f9d402f
commit 4cd30344f1
1 changed files with 9 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
arduino/main/main.ino
View File

@ -51,13 +51,13 @@ PIDController angle_pid = PIDController(PID_P, PID_I, PID_D, balance_voltage * 0
LowPassFilter lpf_throttle{0.00};
#define FLAG_V 1
//倒立摆参数
float LQR_K1 = 400; //摇摆到平衡
float LQR_K1 = 600; //摇摆到平衡
float LQR_K2 = 80; //
float LQR_K3 = 0.50; //
float LQR_K3 = -0.30; //
float LQR_K1_1 = 200; //平衡态
float LQR_K2_1 = 15; //
float LQR_K3_1 = 0.15; //
float LQR_K3_1 = -0.15; //
//电机参数
@ -68,7 +68,7 @@ BLDCDriver3PWM driver = BLDCDriver3PWM(32, 33, 25, 22);
//命令设置
Command comm;
double target_velocity = 0;
double target_angle = 89.86;
double target_angle = 89.9;
double target_voltage = 0;
void do_K1(char* cmd) { comm.scalar(&LQR_K1, cmd); }
@ -79,6 +79,7 @@ void onPacketCallBack(AsyncUDPPacket packet)
Serial.println(da);
comm.run(da);
Serial.println(LQR_K1);
digitalWrite(22,LOW);
// target_velocity = atoi();
// Serial.print("数据内容: ");
// Serial.println(target_velocity);
@ -183,8 +184,7 @@ void setup() {
Serial.println(F("Motor ready."));
Serial.println(F("Set the target velocity using serial terminal:"));
// pinMode(22,OUTPUT);
// digitalWrite(22,LOW);
}
char buf[255];
int t_v;
@ -230,7 +230,7 @@ void loop() {
}
else // else do swing-up
{ // sets 1.5V to the motor in order to swing up
target_voltage = _sign(gyroZrate) * 3;
target_voltage = -_sign(gyroZrate) * 3;
}
// set the target voltage to the motor
@ -240,32 +240,11 @@ void loop() {
}
else
{
motor.move(lpf_throttle(target_voltage));
motor.move(lpf_throttle(-target_voltage));
}
#else
if (abs(pendulum_angle) < 0.6) // if angle small enough stabilize 0.5~30°,1.5~90°
{
target_velocity = controllerLQR(angle_pid(pendulum_angle), gyroZrate / 57.29578, motor.shaftVelocity());
// limit the voltage set to the motor
if (abs(target_velocity) > lim_v)
target_velocity = _sign(target_velocity) * lim_v;
}
else // else do swing-up
{ // sets 1.5V to the motor in order to swing up
target_velocity = -_sign(gyroZrate) * 30;
}
// set the target voltage to the motor
if (accZ < -13000 && ((accX * accX + accY * accY) > (14000 * 14000)))
{
motor.move(0);
}
else
{
motor.move(lpf_throttle(target_velocity));
}
motor.move(0);
#endif
#if 1