From d99e32ca0db47a4e4e9870741ed4b955e7436342 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E6=85=95=E7=82=8E?= <29385962@qq.com> Date: Sun, 2 Jan 2022 16:12:16 +0000 Subject: [PATCH] =?UTF-8?q?update=20arduino/Betas/RGB=5FV1.1.1/main/main.i?= =?UTF-8?q?no.=20=E5=A2=9E=E5=8A=A0debug=E5=8A=9F=E8=83=BD=EF=BC=8C?= =?UTF-8?q?=E6=96=B9=E4=BE=BFwebserver=E7=AB=AF=E6=9F=A5=E7=9C=8B=E8=B0=83?= =?UTF-8?q?=E8=AF=95=E4=BF=A1=E6=81=AF?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- arduino/Betas/RGB_V1.1.1/main/main.ino | 92 ++++++++++++++++++++------ 1 file changed, 71 insertions(+), 21 deletions(-) diff --git a/arduino/Betas/RGB_V1.1.1/main/main.ino b/arduino/Betas/RGB_V1.1.1/main/main.ino index 83a277f..ca6a670 100644 --- a/arduino/Betas/RGB_V1.1.1/main/main.ino +++ b/arduino/Betas/RGB_V1.1.1/main/main.ino @@ -1,7 +1,9 @@ /** - * 自平衡莱洛三角形 RGB版 HW:Ver 1.5 FW:Ver 1.1.1 - RGB版本程序 https://gitee.com/muyan3000/RGBFOC 基于45°(https://gitee.com/coll45/foc/)程序修改 - arduino开发环境-灯哥开源FOChttps://gitee.com/ream_d/Deng-s-foc-controller，并安装Kalman。 + 自平衡莱洛三角形 RGB版 HW:Ver 1.5 FW:Ver 1.1.1 + 立创EDA https://oshwhub.com/muyan2020/zi-ping-heng-di-lai-luo-san-jiao_10-10-ban-ben_copy + RGB版本程序 https://gitee.com/muyan3000/RGBFOC 基于45°(https://gitee.com/coll45/foc/)程序修改 + arduino开发环境-灯哥开源FOChttps://gitee.com/ream_d/Deng-s-foc-controller，并安装Kalman。 + FOC引脚32, 33, 25, 22 22为enable AS5600霍尔传感器 SDA-23 SCL-5 MPU6050六轴传感器 SDA-19 SCL-18 本程序有两种平衡方式， FLAG_V为1时使用电压控制，为0时候速度控制。电压控制时LQR参数使用K1和K2，速度控制时LQR参数使用K3和K4 @@ -51,20 +53,22 @@ const int threshold_top = 20; //触摸顶部阈值 const int threshold_bottom = 1; //触摸底部阈值，越接近数值越小 const int threshold_count = 4; //触摸计数器有效值，通常会有意外的自动触发 -int touchread[4] = {100,100,100,100}; //初始化触摸读取值为100，无触摸 +int touchread[4] = {100, 100, 100, 100}; //初始化触摸读取值为100，无触摸 int touchDetected[4] = {}; //通过touchdetected持续计数判断是否按键，防止无触碰触发 bool touch_touched[4] = {}; //单击判断 int touch_touched_times[4] = {}; //单击次数，单击切换模式，双击 int touch_touching_time[4] = {}; //持续触摸秒数，用于判断长按事件，长按关闭，长按开启，开启状态长按调光， -bool touch_STATE[4] = {1,1,1,1}; // 定义按键触发对象状态变量初始值为true默认开启 +bool touch_STATE[4] = {1, 1, 1, 1}; // 定义按键触发对象状态变量初始值为true默认开启 const char* username = "admin"; //web用户名 const char* userpassword = "12345678"; //web用户密码 const char* ServerName = "ESP32-LELO-RGB"; char DateTimeStr[20] = "1970-01-01 00:00:00"; -char Debug_Log[8192] = ""; -bool log_control = 1; +char Debug_Log[255][255]; +uint32_t loop_time_begin = millis(); +int debug_times; +bool log_control = 0, debug_log_control = 0; WebServer ESP32Server(80); @@ -213,6 +217,20 @@ void do_K43(char* cmd) { comm.scalar(&LQR_K4_3, cmd); } +void Debug_Log_func(String debuglog, bool debug_begin = 0) { + uint32_t loop_time_end; + if (debug_log_control) { + if (debug_begin) { + loop_time_begin = millis(); + sprintf(Debug_Log[debug_times], "%s Begin time:%d", debuglog.c_str(), loop_time_begin); + } else { + loop_time_end = millis(); + sprintf(Debug_Log[debug_times], "%s\t%s End time:%d\tProcessed in %d ms\tFreeHeap:%d\r\n", Debug_Log[debug_times], debuglog.c_str(), loop_time_end, (loop_time_end - loop_time_begin), ESP.getFreeHeap()); + debug_times++; + } + } +} + void onPacketCallBack(AsyncUDPPacket packet) { char* da; @@ -224,6 +242,8 @@ void onPacketCallBack(AsyncUDPPacket packet) } // instantiate the commander void setup() { + Debug_Log_func("Before setup"); + Debug_Log_func("setup", 1); Serial.begin(115200); pinMode(ACTIVE_PIN, OUTPUT); @@ -244,6 +264,7 @@ void setup() { Serial.println(ESP.getMaxAllocHeap()); //获取芯片可用内存 printf("esp_get_free_heap_size : %d \n", esp_get_free_heap_size()); + printf("getFreeHeap : %d \n", ESP.getFreeHeap()); //获取从未使用过的最小内存 printf("esp_get_minimum_free_heap_size : %d \n", esp_get_minimum_free_heap_size()); @@ -429,16 +450,19 @@ void setup() { //运动控制模式设置 motor.controller = MotionControlType::velocity; - + //速度PI环设置 motor.PID_velocity.P = v_p_1; motor.PID_velocity.I = v_i_1; //最大电机限制电压 - motor.voltage_limit = 12; + motor.voltage_limit = 6; //速度低通滤波时间常数 - motor.LPF_velocity.Tf = 0.02; + motor.LPF_velocity.Tf = 0.01f; + + // angle P controller + motor.P_angle.P = 20; //设置最大速度限制 motor.velocity_limit = 40; @@ -469,17 +493,17 @@ void setup() { Serial.println("System is ready"); Serial.println("-----------------------------------------------"); + + Debug_Log_func("setup"); } char buf[255]; long loop_count = 0; double last_pitch; void loop() { + Debug_Log_func("loop", 1); ArduinoOTA.handle(); motor.loopFOC(); - TenthSecondsSinceStartTask(); - ESP32Server.handleClient(); - delay(2);//allow the cpu to switch to other tasks while (i2cRead(0x3B, i2cData, 14)); accX = (int16_t)((i2cData[0] << 8) | i2cData[1]); @@ -584,6 +608,8 @@ void loop() { touchAttach(3, T4); + TenthSecondsSinceStartTask(); + //单击事件处理 if (touch_touched[1]) { //Serial.print("\nLight1 touched "); @@ -608,6 +634,7 @@ void loop() { FastLED.show(); } + Debug_Log_func("loop"); } /* mpu6050加速度转换为角度 acc2rotation(ax, ay) @@ -656,18 +683,18 @@ float controllerLQR(float p_angle, float p_vel, float m_vel) last_unstable_time = millis(); if (stable) //如果是稳态进入非稳态则调整为目标角度 { - target_angle = EEPROM.readFloat(0); + target_angle = EEPROM.readFloat(0) - p_angle; stable = 0; } } if ((millis() - last_unstable_time) > 500 && !stable) //非稳态进入稳态超过500ms检测，更新目标角为目标角+摆角，假设进入稳态 { - target_angle -= _sign(target_velocity) * 0.2; + target_angle -= _sign(target_velocity) * 0.4; stable = 1; } - if ((millis() - last_stable_time) > 2500 && stable) { //稳态超过2000ms检测，更新目标角 - if (abs(target_velocity) > 2.5 && abs(target_velocity) < 15) { //稳态速度偏大校正 + if ((millis() - last_stable_time) > 2500 && stable) { //稳态超过2000ms检测，更新目标角 + if (abs(target_velocity) > 3 && abs(target_velocity) < 10) { //稳态速度偏大校正 last_stable_time = millis(); target_angle -= _sign(target_velocity) * 0.2; } @@ -707,6 +734,8 @@ unsigned long LastMillis = 0; void TenthSecondsSinceStartTask() //100ms { unsigned long CurrentMillis = millis(); + ESP32Server.handleClient(); + delay(1);//allow the cpu to switch to other tasks if (abs(int(CurrentMillis - LastMillis)) > 100) { LastMillis = CurrentMillis; @@ -856,6 +885,10 @@ String ProcessUpdate() //页面更新 ReturnString += ","; ReturnString += TimeString(millis() / 1000); + ReturnString += ","; + ReturnString += log_control; + ReturnString += ","; + ReturnString += debug_log_control; ReturnString += ","; ReturnString += bat_voltage; if (log_control) { @@ -891,6 +924,18 @@ String ProcessUpdate() //页面更新 ReturnString += v_i_2; ReturnString += ","; ReturnString += v_p_2; + ReturnString += ","; + if (debug_log_control) { + for (int i = 0; i < debug_times; i++) { + if (String(Debug_Log[i]) != "") { + //Serial.println(Debug_Log[i]); + ReturnString += Debug_Log[i]; + memset( Debug_Log[debug_times], 0, sizeof(Debug_Log[debug_times]) ); + } + if (i == debug_times - 1) + debug_times = 0; + } + } //Serial.println(ReturnString); return ReturnString; } @@ -953,11 +998,16 @@ void PocessControl(int DeviceType, int DeviceIndex, int Operation, float Operati printf("Reboot..."); esp_restart(); } - } else if (DeviceIndex == 5) { + } else if (DeviceIndex == 5) { //参数记录输出控制 if (Operation % SysIndex == 0) log_control = 0; else if (Operation % SysIndex == 1) log_control = 1; + } else if (DeviceIndex == 6) { //DEBUG输出控制 + if (Operation % SysIndex == 0) + debug_log_control = 0; + else if (Operation % SysIndex == 1) + debug_log_control = 1; } } @@ -966,7 +1016,7 @@ void PocessControl(int DeviceType, int DeviceIndex, int Operation, float Operati if (Operation == 0) { sprintf(do_commd, "%.2f", Operation2); - Serial.println(do_commd); + //Serial.println(do_commd); if (DeviceIndex == 0) //期望角度TA { do_TA(do_commd); @@ -1061,7 +1111,7 @@ void handleNotFound() Operation = 0; } - printf("DeviceType:%d DeviceIndex:%d Operation:%d Operation2:%.2f\n", DeviceType, DeviceIndex, Operation, Operation2 ); + //printf("DeviceType:%d DeviceIndex:%d Operation:%d Operation2:%.2f\n", DeviceType, DeviceIndex, Operation, Operation2 ); PocessControl(DeviceType, DeviceIndex, Operation, Operation2); } @@ -1153,7 +1203,7 @@ double return_voltage_value(int pin_no) } //触摸感应处理 -void touchAttach(int touchID, uint8_t touchPin){ +void touchAttach(int touchID, uint8_t touchPin) { touchread[touchID] = touchRead(touchPin); if ( touchread[touchID] <= threshold_top && touchread[touchID] > threshold_bottom ) { //达到触发值的计数 //delay(38); // 0.038秒